How to Setup MySQL (Master-Slave) Replication in RHEL, CentOS, Fedora

05
Th4

The following tutorial aims to provide you a simple step-by-step guide for setting up MySQL (Master-Slave) Replication in RHEL 6.3/6.2/6.1/6/5.8, CentOS 6.3/6.2/6.1/6/5.8 and Fedora 17,16,15,14,13,12 using latest MySQL version. This guide is specially written for CentOS 6.3 Operating System, but also work with older version of Linux distributions with MySQL 5.x.

The MySQL Replication is very useful in terms of Data Security, Fail-over Solution, Database Backup from Slave, Analytics etc. We use the following things to carry the replication process. In your scenario it would be different.

  • Working Linux OS like CentOS 6.3, RedHat 6.3 or Fedora 17
  • Master and Slave are CentOS 6.3 Linux Servers.
  • Master IP Address is: 192.168.1.1.
  • Slave IP Address is: 192.168.1.2.
  • Master and Slave are on the same LAN network.
  • Master and Slave has MySQL version installed.
  • Master allow remote MySQL connections on port 3306.

We have two servers, one is Master with IP (192.168.1.1) and other is Slave as (192.168.1.2). We have divided the setup process in two phases to make things easier for you, In Phase I we will configure Master server and in Phase II with Slave server. Let’s start the replication setup process.

Phase I: Configure Master Server (192.168.1.1) for Replication

In Phase I, we will see the installation of MySQL, setting up Replication and then verifying replication.

Install a MySQL in Master Server

First, proceed with MySQL installation using YUM command. If you already have MySQL installation, you can skip this step.

# yum install mysql-server mysql

Configure a MySQL in Master Server

Open my.cnf configuration file with VI editor.

# vi /etc/my.cnf

Add the following entries under [mysqld] section and don’t forget to replace tecmint with database name that you would like to replicate on Slave.

 server-id = 1

binlog-do-db=tecmint

relay-log = /var/lib/mysql/mysql-relay-bin

relay-log-index = /var/lib/mysql/mysql-relay-bin.index

log-error = /var/lib/mysql/mysql.err

master-info-file = /var/lib/mysql/mysql-master.info

relay-log-info-file = /var/lib/mysql/mysql-relay-log.info

log-bin = /var/lib/mysql/mysql-bin

Restart the MySQL service.

# /etc/init.d/mysqld restart

Login into MySQL as root user and create the slave user and grant privileges for replication. Replace slave_user with user and your_password with password.

# mysql -u root -p

 

mysql> GRANT REPLICATION SLAVE ON *.* TO ‘slave_user’@’%’ IDENTIFIED BY ‘your_password’;
mysql> FLUSH PRIVILEGES;
mysql> FLUSH TABLES WITH READ LOCK;
mysql> SHOW MASTER STATUS;
+————————–+—————+————————+————————–+
| File                      | Position   | Binlog_Do_DB   | Binlog_Ignore_DB |
+————————–+—————+————————+——————+
| mysql-bin.000003 | 11128001 | tecmint                   |                  |
+————————–+—————+————————+——————+
1 row in set (0.00 sec)
mysql> quit;

Please write down the File (mysql-bin.000003) and Position (11128001) numbers, we required these numbers later on Slave server. Next apply READ LOCK to databases to export all the database and master database information with mysqldump command.

# mysqldump -u root -p –all-databases –master-data > /root/dbdump.db

Once you’ve dump all the databases, now again connect to mysql as root user and unlcok tables.

mysql> UNLOCK TABLES; mysql> quit;

Upload the database dump file on Slave Server (192.168.1.2) using SCP command.

scp /root/dbdump.db root@192.168.1.2:/root/

That’s it we have successfully configured Master server, let’s proceed to Phase II section.

Phase II: Configure Slave Server (192.168.1.2) for Replication

In Phase II, we do the installation of MySQL, setting up Replication and then verifying replication.

Install a MySQL in Slave Server

If you don’t have MySQL installed, then install it using YUM command.

# yum install mysql-server mysql

Configure a MySQL in Slave Server

Open my.cnf configuration file with VI editor.

# vi /etc/my.cnf

Add the following entries under [mysqld] section and don’t forget to replace IP address of Master server, tecmint with database name etc, that you would like to replicate with Master.

 server-id = 2
 master-host=192.168.1.1
 master-connect-retry=60
 master-user=slave_user
 master-password=yourpassword
 replicate-do-db=tecmint
 relay-log = /var/lib/mysql/mysql-relay-bin
 relay-log-index = /var/lib/mysql/mysql-relay-bin.index
 log-error = /var/lib/mysql/mysql.err
 master-info-file = /var/lib/mysql/mysql-master.info
 relay-log-info-file = /var/lib/mysql/mysql-relay-log.info
 log-bin = /var/lib/mysql/mysql-bin

Now import the dump file that we exported in earlier command and restart the MySQL service.

# mysql -u root -p < /root/dbdump.db # /etc/init.d/mysqld restart

Login into MySQL as root user and stop the slave. Then tell the slave to where to look for Master log file, that we have write down on master with SHOW MASTER STATUS; command as File (mysql-bin.000003) and Position (11128001) numbers. You must change 192.168.1.1 to the IP address of the Master Server, and change the user and password accordingly.

# mysql -u root -p

 

mysql> slave stop;
mysql> CHANGE MASTER TO MASTER_HOST=’192.168.1.1′, MASTER_USER=’slave_user’, MASTER_PASSWORD=’yourpassword’, MASTER_LOG_FILE=’mysql-bin.000003′, MASTER_LOG_POS=11128001;
mysql> slave start;
mysql> show slave status\G

 

*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.1.1
                  Master_User: slave_user
                   Master_Port: 3306
               Connect_Retry: 60
             Master_Log_File: mysql-bin.000003
   Read_Master_Log_Pos: 12345100
              Relay_Log_File: mysql-relay-bin.000002
              Relay_Log_Pos: 11381900
   Relay_Master_Log_File: mysql-bin.000003
           Slave_IO_Running: Yes
        Slave_SQL_Running: Yes
            Replicate_Do_DB: tecmint
       Replicate_Ignore_DB:
         Replicate_Do_Table:
    Replicate_Ignore_Table:
 Replicate_Wild_Do_Table
Replicate_Wild_Ignore_Table:
                     Last_Errno: 0
                      Last_Error:
                  Skip_Counter: 0
    Exec_Master_Log_Pos: 12345100
           Relay_Log_Space: 11382055
                Until_Condition: None
                 Until_Log_File:
                 Until_Log_Pos: 0
       Master_SSL_Allowed: No
       Master_SSL_CA_File:
      Master_SSL_CA_Path:
             Master_SSL_Cert:
          Master_SSL_Cipher:
             Master_SSL_Key:
  Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                 Last_IO_Errno: 0
                  Last_IO_Error:
              Last_SQL_Errno: 0
               Last_SQL_Error:
1 row in set (0.00 sec)

Verifying MySQL Replication on Master and Slave Server

It’s really very important to know that the replication is working perfectly. On Master server create table and insert some values in it.

On Master Server

mysql> create database tecmint;
mysql> use tecmint;
mysql> CREATE TABLE employee (c int);
mysql> INSERT INTO employee (c) VALUES (1);
mysql> SELECT * FROM employee;

 

+——+
|    c   |
+——+
|    1   |
+——+
1 row in set (0.00 sec)

On Slave Server

Verifying the SLAVE, by running the same command, it will return the same values in the slave too.

mysql> use tecmint;
mysql> SELECT * FROM employee;

 

+——+
|    c  |
+——+
|    1  |
+——+
1 row in set (0.00 sec)

That’s it, finally you’ve configured MySQL Replication in a few simple steps. More information can be found at MySQL Replication Guide.

(Source: http://www.tecmint.com/)

Rate this post
097 383 6600
097 383 6600

Block "popup" not found